Best Sellers

MICROMOTOR & CONTROLLER SYSTEM "G5" accommodates 110/130 volt power supply (220 volt unit is also available) and features on/off switch, a speed control dial (for speeds up to 28,000 rpm), forward and reverse rotation switch, a foot speed control and an overload indicator. Output voltage: DC3-DC30V continuously variable.

Ceramic Deburring Knives improve safety in your plastic and die cast manufacturing environment. The ceramic blade will stay perfectly sharp when working on hard plastic, glass filled nylons, ABS, melamine's, aluminum/zinc die cast parts and brass castings.

DieProfiler PBAX-3500 made in the USA, is the best & most durable filing machine in the market place today, "no-kidding"! Model PBAX-3500 features .0 to .235 inch stroke adjustment, accommodates up to 3/16 shank diameter tooling and is made for use with Foredom or other, similar flexible shaft drive motors.


View this page in: German German or Spanish Spanish

Terms of Service

ORDER INFORMATION & TERMS OF SALE

SPECIAL 10% DISCOUNT!    

Valued Customer, every time you place an online order where the total value exceeds US $25.00 net (after all "QTY" discounts) you will automatically receive an additional 10% discount.   ONLINE ONLY!

FREE SHIPPING FOR "US" CUSTOMERS:                                                              

For all orders exceeding US $85.00 net value we shall pay the *freight cost when shipped "UPS Ground" or via "US Mail" to all locations in the *USA. *PLEASE NOTE: Orders exceeding  4 lb in weight, or shipments destined for Alaska or Hawaii shall be billed at the actual shipping cost.                                  

FOR OUR VALUED CANADIAN CUSTOMERS:

We recommend you use the US postal service to receive your order! All orders shipped to Canada via UPS Standard or USPS Service (Priority Mail) will be billed to the customer at the actual cost charged by either UPS or US Postal Service. PLEASE NOTE: We shall not be responsible for any duties, sales tax or brokerage fees that may occur when shipping your order to Canada. 

GENEROUS QUANTITY DISCOUNTS:  

Most orders, in addition to the 10% On-line discount, qualify for very generous QTY discounts. Order online to get discounts.


MINIMUM ORDER SIZE:

Unfortunately, we no longer can offer individual Polishing Stones. All Boride Polishing Stones are  only available in full box QTY's.  A freight charge of US $8.50 will be applied to all orders below $85.00 net value (not exceeding 4 pounds) when shipped (within the *USA) via USPS (Priority Mail) or UPS ground. *Orders exceeding 4 lb in weight, or shipments destined for Alaska or Hawaii shall be billed at the actual shipping cost.                                  

DELIVERIES: Your order receives our immediate attention! Orders that originate in North America will be shipped the same day (or the next day) by the carrier of your choice. If for whatever reason we cannot make "same or next day shipment", we shall advise an approximate ship date. The cost of "next day air" or "second day air", etc. will be added to all credit card, C.O.D. and open account orders unless other prior agreements have been established.

INTERNATIONAL ORDERS  

In addition to the USA and Canada we enjoy receiving orders from international customers worldwide.  All orders from international locations are exported from the USA in accordance with United States Export Administration Regulations.  Diversion contrary to U.S. law is prohibited.  We cannot accept letters-of-credit, personal checks, or certified personal checks for foreign orders. NOTE: We will only consider accepting credit cards if the "Ship to Address and Name of the recipient" is the same as the "Billing Address and Name". You may also pay electronically and "wire" the funds to our bank.  Please request the "electronic transfer of funds" information by e-mail. Upon placing numerous orders with us you may wish to establish an "open account status". Just fill out the credit application and we shall do our best to accommodate you in setting up an "open account". 

BUYING OUR PRODUCTS FROM YOUR LOCAL Mold & Die Technology, LLC, (*M-D-T) DISTRIBUTOR. *The Parent of  "www.MoldShopTools.com"

Valued Customer, you may elect to order and purchase our products from a network of qualified, stocking distributors! For details of a distributor nearest you, send us your e-mail detailing your location and we shall promptly respond with the name/address of our distributors, a contact person, phone and fax numbers. Note: Working with a local distributor provides a certain level of service to you our valued customers that we as an on-line business do not offer.  Meaning, the cost of transportation and the time involved for your local salesmen to visit you occasionally, the office and warehouse that may be near you and the presence of local inventory falls directly to the distributor that serves you.  Thus, our distributors will not be able to provide the discounts that we offer on this site. We kindly ask for your understanding to make your buying decision based on these parameters. Thank you very much!  

PAYMENT

ALL PRICES ARE LISTED IN US DOLLARS! There are several convenient payment options available to you: MasterCard, VISA, Discovery and American Express  Card, check, money order or C.O.D. We also extend "30 day" credit to qualified customers, institutions and companies upon supplying a completed Credit-Application-Form. However, to avoid delaying shipment of your initial order, you may wish to charge the funds to your VISA, DISCOVERY or MASTERCARD. We apologize for being unable to process C.O.D. orders outside the USA.

SALES TAX

For domestic (USA) sales, we must collect state sales tax for certain states as required by law! If you have a valid sales tax resale-number and/or a tax exempt number, you may not have to pay local state sales taxes. Please fax your Sales-Tax-Exemption form and we will not charge local state taxes.

PRICES & QUANTITIES

ALL PRICES ARE LISTED IN US DOLLARS and are subject to change without notice. Quantities may be limited. First come, first served.

CHARGING YOUR ORDER TO VISA, DISCOVERY OR MASTERCARD

Charging purchases to your Visa, Discovery or MasterCard is perfectly safe and easy! Simply fill out the details as required in the "Credit Card Charge Form", click on "submit" and as soon as we have the necessary information, we will process your order. Please don't forget to let as know how (UPS or FedEx, etc.) and where you want us to ship your order to. CREDIT APPLICATION FOR "OPEN" ACCOUNT

CREDIT APPLICATION

Please fill out our Credit-Application Form and "mail" or email to our Customer Service Department sales@mdt-usa.net.  We shall promptly notify you of your "Open Account" status.

FOB (SHIPPING POINT)

All orders are shipped from our warehouse in Sterling Heights, Michigan, USA. 

GUARANTEE

Every sale carries our guarantee of complete satisfaction. Whether it is a matter of quality, service, or price. No transaction is ever considered complete unless there is satisfaction in every aspect of your purchase. We guarantee our products to fulfill our representation when given normal and proper usage. Claims that our products do not meet our representation must be made within one month after receipt of goods. The use of the product must be discontinued immediately after it is found unsatisfactory. We will not be responsible for products that have been tampered with.

NOTE: Our warranty does not apply to products that have been used improperly or have been subjected to misuse, including rust or oxidation, neglect, accidents, or modification, or which have been installed or altered and are not capable of being measured and tested.

PRODUCT LIABILITY

Warranty obligation for products that prove to be defective within 90 days of purchase shall be limited to either replacement of the goods, or to a refund. MoldShopTools gives no warranty either expressed or implied and specifically disclaims all other warranties.  In no event shall MoldShopTools liability exceed the buyer's purchase price nor shall MoldShopTools be liable for any indirect or consequential damages.

FREIGHT DAMAGE

If you receive merchandise that has been damaged in transit, it is important to keep the shipping carton, packing materials, and items intact. Please contact our Customer Service Department to initiate a claim and a replacement order.

RETURN POLICY

MoldShopTools will accept merchandise returns and will either replace the product or refund your money if you are not 100% satisfied. Please contact our Customer Service Department to obtain a Return Authorization Number. All returns should be made within 10 days of date of invoice and should be accompanied by the invoice number.

Please write the Return Authorization Number on the outside of the box then send your return to point of purchase.

DELIQUENT CHECK POLICY

If a check is remitted as payment that is dishonored by the institution that it is drawn on, you agree to pay MoldShopTools $25.00 as a service fee (if the check cannot be re-deposited). In addition, you agree to pay any other reasonable charges imposed by any check verification company or collection agency that MoldShopTools may use for collection of the funds.