TELESCOPING RIGHT ANGLE ROTARY HANDPIECE

TELESCOPING RIGHT ANGLE ROTARY HANDPIECE

Telescoping 90 Degree Angle Rotary Handpieces  Achieve up to 3 1/4 inch extension with our telescopic Right Angle (model AH9018332) rotary handpiece.  Especially this unit is suited for deep cavity work to assist mold-makers and folks doing Engine Cylinder Porting work. Both models AH9018332 and the heavy duty type AH901814 easily connect to flexible shaft motors such as Foredom and similar models with a standard key drive. All hand-pieces are supplied with two collets & wrenches. NOTE: Hand-piece AH901418 does not have telescopic capabilities. PRICED AND SOLD 1 HANDPIECE OR REPLACEMENT PART EACH.

Click here for  Foredom flexible shaft motors,  Foredom motor hangers & clamps,  Foredom speed controls & service parts,  Foredom rotary hand-pieces & collets

QTY DISCOUNTS
1 hand piece or replacement part, net price
2 + handpieces or replacement parts (mix items) less 5%


View this page in: German German or Spanish Spanish
Catalog No. Description Price Enter Qty's & click 'Add'
AH901418 "Heavy Duty" 90 degree angle handpiece
Our 90 degree angle "heavy duty" handpiece takes up to 1/4 shank tooling. The handpiece is supplied with 1/8 and 1/4 collet including 2 wrenches. All our handpieces will readily connect to various flexible shaft motors including the "SR" type Foredom power tools.

SOME IMPORTANT DIMENSIONS
Overall length:7.750"
Maximum head dia: 1.975"
Dim. from face of collet to end of head: 1.960"


$ 713.29 (ea.)  
AH9018332 Telescoping 90 degree angle rotary handpiece
This right angle rotary handpiece telescopically extends by an additional 3 1/4 inches for greater reach. The tool is supplied with 1/8 & 3/32 collet as well as 2 wrenches (3mm dia. is optional available). This handpiece will readily connect various flexible shaft motors including the "SR" type Foredom power tools.

SOME IMPORTANT DIMENSIONS
Overall length:7.700" (without extension)
Maximum head dia: .660"
Dim. from face of collet to end of head: 1.340"

 $ 701.95 (ea.)  
AHExploded View Replacement Parts
Use this chart to identify replacement parts "including optional collets" for your "90 degree" and "135 degree" heavy duty hand pieces as required. 		$ 0.00 (ea.)  
AHSP01  Head Assembly with Needle Bearing & Bushing (Part # 1) for RH9018332 Handpiece $ 169.02 (ea.)  
AHSP01a  Needle Bearing (#Part # 1a) for RH9018332 Handpiece $ 15.99 (ea.)  
AHSP01b  Brass Bushing (Part #1b) for RH9018332 Handpiece $ 10.49 (ea.)  
AHSP01c  Inner Head Assembly (Part # 1c) for RH9018332 Handpiece (consists of parts #10,11,12,15 & 17) $ 151.39 (ea.)  
AHSP02  Knurled Cap (Part # 2) for RH9018332 Handpiece $ 21.37 (ea.)  
AHSP03  Hexagon Center Housing (Part # 3) for RH9018332 Handpiece $ 120.03 (ea.)  
AHSP04  Rear Housing (Part # 4) for RH9018332 Handpiece $ 74.67 (ea.)  
AHSP05a  1/8 Collet (Part # 5a) for AH9018332 Handpiece $ 33.97 (ea.)  
AHSP05b  3/32 Collet (Part # 5b) for RH9018332 Handpiece $ 33.97 (ea.)  
AHSP05C  3mm Collet (Part # 5C) for RH9018332 Handpiece $ 36.41 (ea.)  
AHSP06  Cover Plate (Part # 6) for RH 9018332 Handpiece $ 20.36 (ea.)  
AHSP07  Sliding Hexagon Shaft (Part # 7) for RH9018332 Handpiece $ 18.54 (ea.)  
AHSP08  Ball Bearing (Part # 8 or 14) for RH9018332 Handpiece $ 21.37 (ea.)  
AHSP09  Drive Connector for Foredom Shaft (Part #9) for RH9018332 Handpiece $ 26.20 (ea.)  
AHSP10  Snap Ring (Part # 10) for RH9018332 Handpiece $ 1.31 (ea.)  
AHSP11  Ball Bearing (Part #11) for RH9018332 Handpiece $ 24.89 (ea.)  
AHSP12  Large Gear Wheel G.W.1 (Part #12) for RH9018332 Handpiece $ 49.79 (ea.)  
AHSP13  Small Gear Wheel G.W.2 (Part #13) for RH9018332 Handpiece $ 46.16 (ea.)  
AHSP15  Bearing Spacer Ring & Spring (Part #15) for RH9018332 Handpiece $ 5.95 (ea.)  
AHSP16  Spindle Sleeve (Part #16) for RH9018332 Handpiece $ 79.21 (ea.)  
AHSP17  Collet Spindle (Part # 17) for RH9018332 Handpiece $ 54.83 (ea.)  
AHSP18  Hollow Axle (Part # 18) for RH9018332 Handpiece $ 34.14 (ea.)  
  0-25 of 47 in TELESCOPING RIGHT ANGLE ROTARY HANDPIECE Next 25>>