MICROMOTORS & SPINDLE HEADS

MICROMOTORS & SPINDLE HEADS Various individual Rotary Spindle Heads & Motors this unique system permits combining individual spindle heads combined with motors which offer the proper speed range and torque requirements for your specific application. PRICED AND SOLD 1 "MOTOR" OR "SPINDLE HEAD" EACH!

Click here for Special priced power modules & rotary handpiece sets,  Reciprocating or "side to side" swing handpieces,  Foot controls, extension cables, tools and service parts, Spindle collets,  Air operated filing/lapping machines,  Ultrasonic polishing systems,  Foredom motors,  Complete rotary handpieces. 

QTY DISCOUNTS
1 Unit, net price
2 Units (any item) less 5%


View this page in: German German or Spanish Spanish
Catalog No. Description Price Enter Qty's & click 'Add'
G7-UM20A  UM20A for G7
DC Motor Drive for Rotary
SpindleHead UT08 FOR G7 UNIT 		$ 219.00 (ea.)  
UM20 DC Drive Motor for "all" individual Spindle Heads.
Our UM20 motor features a speed range of 800 to 8,000 RPM) with modest torque. This moter may be used with all spindle heads: UT01, UT03, UT05, UT06, UT07, UT08 & UT011 		$ 219.00 (ea.)  
UM21 DC Drive Motor for Spindle Heads for use with most spindle heads.
Our UM21 "high torque" motor features a speed range of 1,500 to 15,000 RPM providing ample power for most light metal removing and polishing jobs. This motor may be used with the following spindle heads: UT01, UT03, UT05, UT06, UT07 & UT011 		$ 219.00 (ea.)  
UM23 DC Drive Motor for Spindle Heads UT01, UT03, UT011
Our UM23 motor provides high speed (3,000 to 30,000 RPM) with good torque. This motor may be used with UT01, UT03, & UT11 spindle heads. 		$ 359.00 (ea.)  
UT01 Std. Spindle Head with 1/8 or 3mm Collet for use with UM20, UM21 & UM23 Motor
This spindle head is designed for tools from 3/32 up to 1/8 shank dia. and can be mounted on all three motors (as detailed above). Choose optional collets: 3/32, 1/8 & 3mm. 		$ 254.00 (ea.)  
UT03-14 Spindle Head with 1/4" Collet for use with UM20, UM21 & UM23 Motor.
This spindle head is designed for tools up to 1/4 shank. Spindle head will accept all three motors however it is best suited for use with "high torque" motor UM21. Choose optional collets: 3/32, 1/8, 3mm & 6 mm. 		$ 377.00 (ea.)  
UT03-6 Spindle Head with 6mm Collet for use with UM20, UM21 & UM23 Motor.
This spindle head is designed for tools up to 6mm shank. Spindle head will accept all three motors however it is best suited for use with "high torque" motor UM21. Choose optional collets: 3/32, 1/8, 1/4 & 3mm. 		$ 377.00 (ea.)  
UT06-18. 90 degree rotary spindle in use $ 359.00 (ea.)  
UT06-3 Spindle Head heavy duty) 90 Degree angle with 3mm Collet
This Angle Head is designed for use with motors UM20 & UM21. However, the "high torque" motor UM21 with a speed range of 1,500 to 15,000 rpm is best suited for this spindle head. Optional Collets: 3/32 or 1/8mm. 		$ 359.00 (ea.)  
UT07-18 Spindle Head, 120 degrees with1/8 Collet
This spindle head can be used with either motor, UM20 & UM21. Optional Collets: 3/32" and 3mm. 		$ 424.00 (ea.)  
UT07-18. 120 degree rotary tool in use $ 0.00 (ea.)  
UT07-3 Spindle Head, 120 Degrees with 3mm Collet
This spindle head can be used with either motor, UM20 & UM21. Optional Collets: 3/32" and 1/8". 		$ 424.00 (ea.)  
UT08 Spindle Head for "Side to Side" motion (accepts up to 3/16" shanks).
This "polishing head" is great for finishing ribs and slots. Unlike the reciprocating motion of a profiler or lapping tool that, which if not careful would constantly "pound" the bottom of a slot, this tool moves from "side to side" and thus permits polishing sidewalls virtually without touching the bottom. The head accepts up to 4mm (3/16") diameter tooling. Caution: Use this "head" only with UM20 motor! 		$ 490.00 (ea.)  
UT11-18 Spindle Head "Extendet Slender Type" with 1/8 Collet.
This Spindle Head with "extendet reach" is ideal for deep mold cavities or narrow details. You may use either UM20, UM21 or UM23 Motor with this spindle head. Optional Collets: 3/32" or 3mm. 		$ 396.00 (ea.)  
UT11-3 Spindle Head, "Extendet Slender Type" with 3mm Collet
This Spindle Head with "extende reach" is ideal for deep mold cavities or narrow details. You may use either UM20, UM21 or UM23 Motor with this spindle head. Optional Collets: 3/32" or 1/8". 		$ 396.00 (ea.)  
UT2 Click for Power Modules and special priced Sets $ 0.00 (ea.)  
UT3 Click for Motors & Spindle Heads $ 0.00 (ea.)  
UT4 Click for Spindle Head Collets $ 0.00 (ea.)  
UT5 Click here for Reciprocating or Side to Side Swing Handpieces $ 0.00 (ea.)  
UT6 Click here for Foot Control and Service Items $ 0.00 (ea.)  
  0-20 of 20 in MICROMOTORS & SPINDLE HEADS