Best Sellers

Discounts and Shipping

MICROMOTOR & CONTROLLER SYSTEM "G5" accommodates 110/130 volt power supply (220 volt unit is also available) and features on/off switch, a speed control dial (for speeds up to 28,000 rpm), forward and reverse rotation switch, a foot speed control and an overload indicator. Output voltage: DC3-DC30V continuously variable.

Ceramic Deburring Knives improve safety in your plastic and die cast manufacturing environment. The ceramic blade will stay perfectly sharp when working on hard plastic, glass filled nylons, ABS, melamine's, aluminum/zinc die cast parts and brass castings.

DieProfiler PBAX-3500 made in the USA, is the best & most durable filing machine in the market place today, "no-kidding"! Model PBAX-3500 features .0 to .235 inch stroke adjustment, accommodates up to 3/16 shank diameter tooling and is made for use with Foredom or other, similar flexible shaft drive motors.

Order Toll Free: PH: 1-877-638-7106 - FAX: 1-877-638-7107   

"SPECIAL 10% DISCOUNT"  Get 10% off on all orders with a net value of $25!    CHECK OUT OUR GENEROUS QUANTITY DISCOUNTS on most items

"NO ORDER IS TOO SMALL FOR US"  PAY ONLY $6.99 for orders under $75 when shipped via UPS Ground in the USA (excluding  Alaska & Hawaii).   CANADIAN  ORDERS are shipped "UPS Standard" or "US Mail" (your choice).  See our "Terms of Sale" 

"FREE SHIPPING OFFER" for all orders with a net value greater than $75                (see our  "Terms of Sale" )
View this page in: German or Spanish

Terms of Service

ORDER INFORMATION & TERMS OF SALE

SPECIAL 10% DISCOUNT and FREE SHIPPING WITH YOUR ORDERS.!!

SPECIAL 10% DISCOUNT and FREE SHIPPING WITH YOUR ORDERS.!! Every time you place an online order where the total value exceeds US$25 net (after all "QTY" discounts have been taken), you will automatically receive an additional 10% discount. For all orders exceeding US$75 net value, we will pay "Shipping Charges" for up to 15 pounds. This special offer has no time limit and is good whenever you place an online order. *For more details on "Free Shipping" check out DELIVERIES and FREE SHIPPING".

MINIMUM ORDER SIZE and FREIGHT CHARGES FOR SMALL ORDERS

No order is too small for us!! We will charge a flat fee of US$6.99 for all orders under  US$ 75.00 net,  when shipped via UPS Ground or US Mail to any USA Locations (except for Alaska or Hawaii). For orders below US$ 75.00 (net value) to locations in Canada, we can ship via UPS Standard or via US Mail (we apologize, but UPS Standard service is more expensive then UPS Ground and we have to charge a flat fee of US $10.90). For all orders exeeding US$75.00 (net value) we will *pay the shipping cost when shipped "UPS Ground" or via "US Mail" to locations in the USA & Canada (except for Alaska & Hawaii). For more details please click on DELIVERIES and FREE SHIPPING. 

*DELIVERIES and FREE SHIPPING

Providing the "VALUE" of your order exceeds US$75.00 net value (and the total shipping weight is 15 lb. or less) MoldShopTools will pay "UPS Ground" delivery when shipped  to USA locations (except for Alaska & Hawaii). Canadian orders exceeding US$75.00 net and weighing 10 pounds (or less) shall be *"shipped free" via UPS Standard or US Mail. For orders greater then  the maximum "free weight" allowed, we shall always  pay freight for the first 15lb and/or 10lb. 

Your orders receive our immediate attention! Orders that originate in North America will be shipped the same day (or the next day) by the carrier of your choice. If for whatever reason we cannot make "same or next day shipment", we will advise the number of days it will take before the goods will ship. If the order value falls below US $75.00 NET VALUE, or if another method of shipping is desired (next day air, second day air, etc) shipping charges and insurance will be added to all C.O.D., credit card and open account orders unless another, prior agreement was made.

INTERNATIONAL ORDERS

WE WELCOME INTERNATIONAL ORDERS! In addition to the USA, its territories, and Canada, we would enjoy receiving orders from international customers worldwide. All orders from international locations are exported from the USA in accordance with United States Export Administration Regulations.  Diversion contrary to U.S. law is prohibited.  For international orders below US$ 75.00 net value, an additional charge of $7 will be included for processing.  We cannot accept letters-of-credit, personal checks, or certified personal checks for foreign orders. The best way to prevent a delay with your order is to charge it to your valid VISA or MasterCard. NOTE: We will only consider accepting credit cards if the "Ship to Address and the Name of the recipient" is the same as the "Billing Address & the Name". You may also pay electronically and "wire" the funds to our bank.  Please request the "electronic transfer of funds" information by e-mail. Note: We offer an additional 2% discount for all "pre-paid" invoices when paid by "wire"!. Upon placing numerous orders with us you may wish to establish an "open account status". Just fill out the credit application and we shall do our best to accommodate you in setting up an "open account".

BUYING OUR PRODUCTS FROM YOUR LOCAL Mold & Die Technology, Inc, (*M-D-T) DISTRIBUTOR.

*The Parent company of www.MoldShopTools.com

You may elect to order and purchase our products from a network of qualified, stocking distributors! For details of a distributor nearest you, send us your e-mail detailing your location and we shall promptly respond with the name/address of our distributors, a contact person, phone and fax numbers. 

Note: Working with a local distributor provides a certain level of service to you, our valued customers, that we as an on-line business cannot offer.  Meaning, the cost for your local salesmen, the transportation to visit you occasionally and/or frequently and in many instances local inventory falls directly to distributor that serves you.  Thus, our distributors will not be abel to provide you with the discounts that are offered on this site. We kindly ask for your understanding and that you will make your buying decission based on these parameters.  

PAYMENT

ALL PRICES ARE LISTED IN US DOLLARS! There are several convenient payment options available to you: MasterCard, VISA, Discovery Card, check, money order or C.O.D. We also extend "30 day" credit to qualified customers, institutions and companies upon supplying a completed Credit-Application-Form. However, to avoid delaying shipment of your initial order, you may wish to charge the funds to your VISA DISCOVERY or MASTERCARD. We apologize for being unable to process C.O.D. orders outside the USA.

SALES TAX

For domestic (USA) sales, we must collect state sales tax for certain states as required by law! If you have a valid sales tax resale-number and/or a tax exempt number, you may not have to pay local state sales taxes. Please fax your Sales-Tax-Exemption form and we will not charge local state taxes.

PRICES & QUANTITIES

ALL PRICES ARE LISTED IN US DOLLARS and are subject to change without notice. Quantities may be limited. First come, first served.

CHARGING YOUR ORDER TO VISA, DISCCOVERY OR MASTERCARD

Charging purchases to your Visa, Discovery or MasterCard is perfectly safe and easy! Simply fill out the details as required in the "Credit Card Charge Form", click on "submit" and as soon as we have the necessary information, we will process your order. Please don't forget to let as know how (UPS or FedEx, etc.) and where you want us to ship your order to.

CREDIT APPLICATION FOR "OPEN" ACCOUNT

Please fill out our Credit-Application Form and "mail" or fax it to our Customer Service Department.  We shall promptly notify you of your "Open Account" status.

 

FOB (SHIPPING POINT)

All orders are shipped from our warehouse in Traverse City, Michigan, USA. 

GUARANTEE

Every sale carries our guarantee of complete satisfaction. Whether it is a matter of quality, service, or price. No transaction is ever considered complete unless there is satisfaction in every aspect of your purchase. We guarantee our products to fulfill our representation when given normal and proper usage. Claims that our products do not meet our representation must be made within one month after receipt of goods. The use of the product must be discontinued immediately after it is found unsatisfactory. We will not be responsible for products that have been tampered with.

NOTE:Our warranty does not apply to products that have been used improperly or have been subjected to misuse, including rust or oxidation, neglect, accidents, or modification, or which have been installed or altered and are not capable of being measured and tested

PRODUCT LIABILITY

Warranty obligation for products that prove to be defective within 90 days of purchase shall be limited to either replacement of the goods, or to a refund. MoldShopTools gives no warranty either expressed or implied and specifically disclaims all other warranties.  In no event shall MoldShopTools liability exceed the buyer's purchase price nor shall MoldShopTools be liable for any indirect or consequential damages.

FREIGHT DAMAGE

If you receive merchandise that has been damaged in transit, it is important to keep the shipping carton, packing materials, and items intact. Please contact our Customer Service Department to initiate a claim and a replacement order.

RETURN POLICY

MoldShopTools will accept merchandise returns and will either replace the product or refund your money if you are not 100% satisfied. Please contact our Customer Service Department to obtain a Return Authorization Number. All returns should be made within 30 days of date of invoice and should be accompanied by the invoice number.

  • Return freight charges must be prepaid.  C.O.D. returns will not be accepted.
  • Returned merchandise must be in the original packaging and in resalable condition.
  • Items returned to us due to customer error may be subject to a restocking charge. Special items are not returnable.
  • Defective items can be returned within 60 days of invoice date

Please write the Return Authorization Number on the outside of the box then send your return to point of purchase.

DELIQUENT CHECK POLICY

If a check is remitted as payment that is dishonored by the institution that it is drawn on, you agree to pay MoldShopTools $25.00 as a service fee (if the check cannot be re-deposited). In addition, you agree to pay any other reasonable charges imposed by any check verification company or collection agency that MoldShopTools may use for collection of the funds.